2,306
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: + + + + + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
== Installing Raspbian ==
1. Download Raspbian image from [http://www.raspberrypi.org/downloads/ here].<br />
2. Format SD card using FAT32.<br />
<nowiki>sudo mkdosfs -F 32 -v /dev/mmcblk0</nowiki>
3. Install squashed file sistem on SD card.
<nowiki>sudo dd bs=4M if="/home/linux/2013-02-09-wheezy-raspbian.img" of=/dev/mmcblk0</nowiki>
[https://cmanios.wordpress.com/2013/03/10/install-raspbian-wheezy-linux-to-raspberry-pi-using-linux/ Linux]
[https://cmanios.wordpress.com/2013/03/10/install-raspbian-wheezy-linux-to-raspberry-pi-using-linux/ Linux]
== Raspbian default username & password ==
By default the username and password are:<br />
Username: pi<br />
Passowrd:raspberry
== WiFi setup ==
1. Scan wifi networks available:
<nowiki>sudo iwlist wlan0 scan</nowiki>
2. Write down the ESSID (wifi network name) and IE (authentication used)
3. Edit /etc/wpa_supplicant/wpa_supplicant.conf, add the following at the bottom of the file.
<nowiki>
network={
ssid="The_ESSID_from_earlier"
psk="Your_wifi_password"
}
</nowiki>
4. If after a few seconds the Raspberry WiFi isn't connected:
<nowiki>
sudo ifdown wlan0
sudo ifup wlan0
</nowiki>