2,306
edits
Changes
Jump to navigation
Jump to search
mLine 1:
Line 1: + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 5:
Line 32: − + − + + + + + + + + + + + + + + − + − auto ens32+ − iface ens32 inet static − address 20.1.40.109 − netmask 255.255.255.0 − gateaway 20.1.40.1 − dns-nameservers 20.1.40.23 − up route add -net 15.17.160.0 netmask 255.255.240.0 gw 20.1.40.1 − down route del -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1 − + − auto ens33+ − iface ens33 inet dhcp+ − </nowiki>+ − == Promisc Bridge ==+ − <nowiki>auto eth4+ − iface eth4 inet manual+ − up ifconfig $IFACE 0.0.0.0 -multicast up+ − down ifconfig $IFACE down+ + + − auto eth5+ − iface eth5 inet manual − up ifconfig $IFACE 0.0.0.0 -multicast up − down ifconfig $IFACE down − + − + − pre-up ifconfig eth4 0.0.0.0 promisc up+ − pre-up ifconfig eth5 0.0.0.0 promisc up+ − post-down ifconfig eth4 -promisc up+ − post-down ifconfig eth5 -promisc up+ − up ifconfig $IFACE 0.0.0.0 -multicast up+ − down ifconfig $IFACE down+ − bridge_ports eth4 eth5+ − bridge_stp off+ − bridge_fd 0+ − bridge_ageing 0+ − bridge_maxwait 0+ − + + + + + + + + + + + +
→Promisc Bridge
<nowiki># This file describes the network interfaces available on your system
<nowiki># This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto ens32
iface ens32 inet static
address 20.1.40.109
netmask 255.255.255.0
gateaway 20.1.40.1
dns-nameservers 20.1.40.23
up route add -net 15.17.160.0 netmask 255.255.240.0 gw 20.1.40.1
down route del -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1
# post-up ip route add 15.17.160.0/20 via 20.1.40.1 dev ens33 # NOT WORKING
# The primary network interface
auto ens33
iface ens33 inet dhcp
</nowiki>
== WF0006D3 ==
<syntaxhighlight lang="text">
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
# The loopback network interface
auto lo
#auto lo
iface lo inet loopback
#iface lo inet loopback
auto eth0
allow-hotplug eth0
iface eth0 inet manual
auto br0
iface br0 inet dhcp
bridge_ports eth0
wpa-driver wired
wpa-conf /etc/wpa_supplicant/conf/WF0006D3.conf
# The primary network interface
# WF0017B1 Claudia
# bridge_hw D8:CB:8A:B8:95:86
# The primary network interface
# WF0006D3 Rafa
bridge_hw ec:8e:b5:77:3e:e1
# WF001CBD Rafa (Lo tiene Javier Saez)
# bridge_hw D8:CB:8A:B8:95:51
dns-nameservers 127.0.0.1
up route del -net 0.0.0.0 netmask 0.0.0.0 gw 15.17.160.1
post-up route add -net 20.1.43.0 netmask 255.255.255.0 gw 15.17.160.1
up route add -net 22.0.0.0 netmask 255.255.255.0 gw 15.17.160.1
# gateaway 10.23.0.1
</syntaxhighlight>
auto Bridge
==Promisc Bridge==
iface Bridge inet manual
<nowiki>auto eth4
iface eth4 inet manual
up ifconfig $IFACE 0.0.0.0 -multicast up
down ifconfig $IFACE down
auto eth5
iface eth5 inet manual
up ifconfig $IFACE 0.0.0.0 -multicast up
down ifconfig $IFACE down
auto Bridge
iface Bridge inet manual
</nowiki>
pre-up ifconfig eth4 0.0.0.0 promisc up
pre-up ifconfig eth5 0.0.0.0 promisc up
post-down ifconfig eth4 -promisc up
post-down ifconfig eth5 -promisc up
up ifconfig $IFACE 0.0.0.0 -multicast up
down ifconfig $IFACE down
bridge_ports eth4 eth5
bridge_stp off
bridge_fd 0
bridge_ageing 0
bridge_maxwait 0
</nowiki>